Precision Uchel ER Melino Chuck Set
Mae set chuck melino ER yn set chuck collet manwl uchel, mae'r collets wedi'u llwytho'n sbring, felly gallant afael mewn ystod o feintiau.Mae'r set chuck hon yn berffaith i'w defnyddio gyda melinau a pheiriannau manwl eraill.
| Gorchymyn Rhif. | Maint Twll | PCS /SET | |
| modfedd | mm | ||
| ER16-8 modfedd (mm) | 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 | 2 3 4 5 6 7 8 10 | 8 |
| ER25-6 modfedd (mm) | 1/8 3/16 5/16 3/8 1/2 5/8 | 4 6 8 10 12 16 | 6 |
| ER25-10 modfedd (mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 | 3 4 5 6 8 10 12 14 15 16 | 10 |
| ER32-6 modfedd (mm) | 1/4 5/16 3/8 1/2 5/8 3/4 | 6 8 10 12 16 20 | 6 |
| ER32-12 modfedd (mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 | 3 4 5 6 8 10 12 14 15 16 18 20 | 12 |
| ER40-8 modfedd (mm) | 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 | 3 5 8 12 15 18 22 26 | 8 |
| ER140-15 modfedd (mm) | 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 | 3 4 5 6 8 10 12 14 15 16 18 20 22 24 26 | 15 |
Edau Bar Draw
| Taper o collet chuck | Edau bar tynnu | |
| R8 | 7/16＂-20UNF | |
| 7:24 30 | M12×1.75 | 1/2＂-13UNC |
| 7:24 40 | M16×2.0 | 5/8＂-11UNC |
| 7:24 50 | M24×3.0 | 1＂-8UNC |
| MS2 | M10×1.5 | 3/8＂-16UNC |
| MS3 | M12×1.75 | 1/2＂-13UNC |
| MS4 | M16×2.0 | 5/8＂-11UNC |
| MS5 | M20×2.5 | 3/4＂-10UNC |
| MS6 | M24×3.0 | 1 ＂ -8UNC |
Rhowch wybod i edefyn bar tynnu chuck collet a manyleb y collets (metrig neu fodfedd)
Rhowch wybod hyd shank syth a dia.
Rydym yn falch o gyflenwi collets a chucks gyda shank gwahanol a meintiau yn ôl eich gofyniad.
